MDM-3

MDM 3 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 0.7 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications	Silicone machining Prototype component fabrication Electric-grouting/Potting Adhesive machining Laboratory use
Metering pump drive	electrical actuator with steadier rotation speed
Mixing ratio	depends on pump combination
Output	0,7 ltr/min at MV 100:100
Control	on/off switch
Tank	Container connector for original Gebinde, orContainer 0,5 l / 0,75 l and 2 l (plastics), 3 l, 5 l, 10 l, 30 l or 60 l in VA possible
Compressed air	Standard equipment without compressed air
Power supply	220 Volt, 50 Hz Special voltage on request!
Hose length	1,5 m, 3 m, 5 m
Mixing head	Static mixture
Additional equipment	Spray equipment

MDM 5

MDM 5
mdm-5_DE-EN.pdf
Adobe Acrobat document [522.4 KB]

MDM 5 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 1.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

Technical data

Applications	Prototype component fabrication Electric-grouting Silicone machining Laboratory use
Metering pump drive	Frequency controlled motor or air motor
Mixing ratio	100: 10 up to 10: 100 depends on pump combinations
Output	Max. 1.5 kg/min. at mixing ratio 100 : 100
Control	With shotsize-timer potlife-timer, output-regulating by potentiometer
Tank	0.5 l / 0.75 l and 2 l (plastics), 3 l, 5 l and special version 10 l, 30 l, 60 l, 100 l in stainless steel possible
Tank heating	available
Compressed air	Standard 400 l / min, 6 – 8 bar Spraying ca. 1000 l / min, 6 – 8 bar
Power supply	220 Volt, 50 Hz
Hose length	1,5 m, 3 m, 5 m
Mixing head	LC 5 / 2, LC 5 / 3, LC 5 / 3 M, LC 5 / 4, LC 5 / 4 R
Additional equipment	Tank heating, heated hoses, continuously variable adjustment mechanism for A-components, spray intention

MDM 6

MDM 6 | 2K Meter Mix and Dispense Machine

Dosing system for processing small quantities of liquid, two-component synthetic resins

Compact system for efficient processing of liquid synthetic resins made of polyurethane resin or epoxy resin with an output up to 3.5 l/min at MV 100:100 (depending on viscosity, mixing ratio and hose lengths).

MDM 6
mdm-6_DE-EN.pdf
Adobe Acrobat document [516.9 KB]

Technical data

Applications	Prototyp component fabrication Electric-grouting Adhesive machining Laboratory use Spray uses
Metering pump drive	Frequency controlled electric motor
Mixing ratio	100: 10 up to 10: 100 depends on pump combinations. Adjustment by stepless gear box by display for B-pump
Output	Up to 3.5 kg/min at mixing ratio 100 : 100
Control	Shot size timer, potlife-timer, big or small circulation of the components, flow rate adjustment over potentiometer
Tank	3 l, 5 l, 10 l, 30 l, 60 l or 100 l in stainless steel
Tank heating	Possible
Compressed air	Standard 400 l / min, 6 – 8 bar Spreaying ca. 1000 l / min, 6 – 8 bar
Power supply	380 / 415 Volt, 50 Hz
Hose length	1,5 m, 3 m, 5 m; heating possible
Mixing head	LC 5 / 2, LC 5 / 3 , LC 5 / 3 M, LC 5 / 4, LC 5 / 4 R, LC 6 / 2 or LC 6 / 3
Additional equipment	Continuously variable adjustment mechanism for A-components, spray intention, automatic refill of the 30 l, 60 l or 100 l material container