System with volume flow control and automatic refill from IBC tanks for processing polyurethane resin or epoxy resin with an output of up to 50 l/min (depending on viscosity, mixing ratio and hose length).
Applications |
Liquid PU-Paste processing Duplicate part production Electric grouting RTM (Resin Transfer Molding) |
Metering pump drive |
Frequency controlled motor from 0.37 up to 2.2 kW |
Mixing ratio |
Automatic regulation through flow rate measurement for components |
Output |
Up to 50 l/min. at MV 100:100 possible |
Control |
Siemens SPS with control panel for monitoring and regulation of all machining and process parameter |
Tank |
60, 100 and 200 l possible; in stainless steel |
Refilling |
Automatically from IBC |
Heating |
Available for tanks, hose and mixing head |
Compressed air |
Casting ca. 650 l/min, 6-8 bar Spraying ca. 1000 l/min, 6-8 bar |
Power supply |
380/415 Volt, 50 Hz, depends on equipment special voltage on request |
Hose length |
5 m, 10 m; special length |
Mixing head |
LC 5/2, LC 5/3, LC 5/4, LC 5/4 R, LC 6/2, LC 6/3, LC 8/2 |
|
|